English
 |
Penetrant JFC-M
Jienuo
Penetrant JFC-M is a high-performance wetting and penetrating agent, mainly composed of polyoxyethylene acetylate compounds (nonionic/cationic type). It features excellent water solubility, strong penetration (≤6s in 1% aqueous solution), and high-temperature resistance (>100℃ flash point). Widely used in textile dyeing, printing, bleaching, leather processing, and leather degreasing, it also serves as an auxiliary in resin finishing and pre-treatment, ensuring efficient penetration and easy rinsing.
Product Advantage
Superior Penetration Performance: With a penetration time of ≤6s (in 1% aqueous solution), it ensures rapid and thorough wetting and penetration, significantly improving processing efficiency.
High-Temperature Stability: Its flash point is >100℃ (1% aqueous solution), maintaining good performance even under high-temperature conditions without oil separation.
Wide pH Adaptability: It works stably in a pH range of 5.0-7.5 (1% aqueous solution), suitable for various process environments.
Excellent Degreasing & Rinsing Property: It has better degreasing ability than conventional JFC at high temperatures and is easy to rinse off, leaving no residue.
Technical Parameters
Parameter Item | Specification |
Chemical Composition | Mainly polyoxyethylene acetylate compounds, compounded with other penetrants |
Type | Nonionic/Cationic |
Appearance | Light yellow to off-white oily or waxy substance |
pH Value (1% Aqueous Solution) | 5.0-7.5 |
Flash Point (1% Aqueous Solution) | >100℃ |
Penetration (1% Aqueous Solution) | ≤6s |
Packaging | 200kg iron drum, 50kg plastic drum |
Shelf Life | 2 years |
Product Uses
Textile Dyeing & Finishing: Used as a penetrant in processes like sizing, desizing, scouring, bleaching, carbonizing, printing, and dyeing, ensuring uniform treatment.
Leather Processing: Serves as a penetrant and degreasing agent in leather production, enhancing the penetration of chemicals and the effect of degreasing.
Resin Finishing & Pre-treatment: Acts as an auxiliary in resin finishing and pre-treatment of textiles, improving the bonding and performance of resins.
Product Operate Guide
Prepare a 1% aqueous solution, adjust the pH to 5.0-7.5, and add Penetrant JFC-M according to the specific process requirements (generally 0.5-2% of the material weight). Stir well and proceed with the subsequent process.
FAQ
Q: What is the shelf life of Penetrant JFC-M?
A: It has a shelf life of two years when stored in a dry and ventilated place according to general chemical storage methods.
Q: Can it be used in acidic environments?
A: Yes, it is stable in a pH range of 5.0-7.5, so it can be used in slightly acidic environments.
Q: Is it easy to rinse off after use?
A: Yes, it is easy to wash off various oils and leaves no residue, ensuring a clean finish.
